MOV (inverted wide immediate)
Move (inverted wide immediate) moves an inverted 16-bit immediate
value to a register.
This is an alias of
MOVN.
This means:
-
The encodings in this description are named to match the encodings of
MOVN.
- The description of MOVN gives the operational pseudocode, any constrained unpredictable behavior, and any operational information for this instruction.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| sf | 0 | 0 | 1 | 0 | 0 | 1 | 0 | 1 | hw | imm16 | Rd |
| opc | | | | |
32-bit (sf == 0 && hw == 0x)
MOV <Wd>, #<imm>
is equivalent to
MOVN <Wd>, #<imm16>, LSL #<shift>
and is the preferred disassembly when
!(IsZero(imm16) && hw != '00') && !IsOnes(imm16).
64-bit (sf == 1)
MOV <Xd>, #<imm>
is equivalent to
MOVN <Xd>, #<imm16>, LSL #<shift>
and is the preferred disassembly when
!(IsZero(imm16) && hw != '00').
Assembler Symbols
| <Wd> |
Is the 32-bit name of the general-purpose destination register, encoded in the "Rd" field.
|
| <imm> |
For the 32-bit variant: is a 32-bit immediate, the bitwise inverse of which can be encoded in "imm16:hw", but excluding 0xFFFF0000 and 0x0000FFFF
|
|
For the 64-bit variant: is a 64-bit immediate, the bitwise inverse of which can be encoded in "imm16:hw".
|
| <Xd> |
Is the 64-bit name of the general-purpose destination register, encoded in the "Rd" field.
|
Operation
The description of MOVN gives the operational pseudocode for this instruction.
Operational information
If PSTATE.DIT is 1:
-
The execution time of this instruction is independent of:
-
The values of the data supplied in any of its registers.
-
The values of the NZCV flags.
-
The response of this instruction to asynchronous exceptions does not vary based on:
-
The values of the data supplied in any of its registers.
-
The values of the NZCV flags.